华灿兴科技版权所有® 2010-2025 粤ICP备10101563号
H801RA is a salve controller that transmits data based on Ethernet protocol, the input port is used for receiving data and output port is used for sending data. H801RA controls LED lamps with four output ports. H801RA can be connected to master controller or computer.
Online software is "LED Studio software" and offline software is “LED Build Software”.
2. Supported Driver Chips
LPD6803, LPD8806, LPD6813, LPD1882, LPD1889, LPD6812, LPD1886; DMX512, HDMX, APA102, P9813, DZ2809, SM16716; UCS6909, UCS6912, UCS1903, UCS1909, UCS1912; WS2801, WS2803, WS2811, WS2812, INK1003; TM1812, TM1809, TM1804, TM1803; BS0901, BS0902, BS0815, LY6620, BS0825; LD1510, LD1512; TLS3001, TLS3002; DM413, DM114, DM115, DM13C, DM134, DM135, DM136; MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, 74HC595, 6B595, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, HEF4094, A8012 etc.
Note: H801RA can support more than the chips listed above(some chips have the same sequence diagram, for example: UCS512, WS2821 and DMX512 have the same protocol. UCS2903 has the same sequence diagram with UCS1903, so H801RA supports them all).
3. Software download link
When H801RA is connected to master controller, software is LED Build.
LED Build download: https://drive.google.com/open?id=0B1gzqyV6hfOgN2pkMV8yMFozYzQ
LED Build Tutorial Video: https://drive.google.com/open?id=0B1gzqyV6hfOgUnFjeG9EM3VRZjA
When H801RA is connected to computer, software is LED Studio.
LED Studio download: https://drive.google.com/open?id=0B1gzqyV6hfOgWFpuM3BoN1VaTGs
H801RA to PC tutorial document download: https://drive.google.com/open?id=0B1gzqyV6hfOgUnBhX2pLeHFvNXM
(1). Four ports drive a maximum of 3412 pixels.
(2). H801RA can be connected to mastert controller or computer.
(3). High synchronization performance, the transmission of adjacent slave controller delays within 200 ns.
(4). Good control affect. Using a special algorithm to control the disable lamp to reach 256 levels grayscale and can control the enable lamp to reach 65536 (64K) levels grayscale.
(5). Far transmission distance. The nominal transmission distance of two controllers is 100 meters.
5. Product Display
6. Connection Diagram
Controlled by Master controller(the blue line is crossover network cable)
Controlled by PC
7. Brief Software Introduction
LED Build(when controlled by master controller):
(2). Light Setting
(3). Effect Making
LED Studio(when controlled by computer):
(1). Allocate an IP address for H801RA
(2). Mapping in LED Studio
(3). Light Setting
(4). Effect Making
Input Voltage: Customized
Power Consumption: 1W
Drive Pixels Number: 3412
Dimension: L163 x W155 x H54
Carton Size: L205 x W168 X H69