当前位置: Home > Products > LED Master Controller
LED Master Controller

H803TC

H803TC
  • 型号H803TC

Detailed

1. Features



(1). H803TC can work with PC(online), SD card(offline) or DMX console.



(2). H803TC drives maximum 170000 pixels, 2 ports control maximum 255 slave controllers. 



(3). Slave controllers include H802RA and H801RC. 



(4). By combining H803TC with H802RA, you can set address for DMX512 chips.



(5). H803TC transmits signal based on Ethernet Protocol. 



(6). Use four buttons or PC to switch files, set play mode, speed and brightness.



(7). SD card supports FAT32, FAT16 format, maximum capacity is 64G bytes, stores up to 64 DAT files.



2. Supported Driver Chips



LPD6803, LPD8806, LPD6812, LPD6813, LPD1882, LPD1889, LPD1883, LPD1886, DMX512, HDMX, APA102, P9813, LD1510, LD1512, LD1530, LD1532, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, WS2812, DZ2809, SM16716, TLS3001, TLS3002, TM1812, TM1809, TM1804, TM1803, TM1914, TM1926, TM1829, TM1906, INK1003, BS0825, BS0815, BS0901, LY6620, DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, etc.



Note: H803TC supports more than the chips listed above(some chips have the same sequence diagram, for example: UCS512, WS2821 and DMX512 have the same protocol, H803TC supports them all).



3. Basic Workflow



Work with SD card(offline)



Step1. Connect lights, slave controller and H803TC like the following image.(I didn't draw power supply)



I use NET1 and NET2, you can also just use NET1.



HTB1QfunPVXXXXaUXpXXq6xXFXXXs



For example: 



if you want to control WS2812B strip, just connect GND, DI on strip to GND, DAT on slave controller.



HTB1QfunPVXXXXaUXpXXq6xXFXXXs



Step2. Download and Install LED Build Software



In this mode, you will need LED Build Software.



LED Build Software Download: https://drive.google.com/open?id=0B1gzqyV6hfOgUDZBVl84SmRDV28



LED Build Software Tutorial Video: https://drive.google.com/open?id=0B1gzqyV6hfOgUnFjeG9EM3VRZjA 



Step3. Program in LED Build Software



Basic software workflow



1. Place Pixels



For example there are 1 slave controller(H801RC) connected to H803TC



 4



2. Light Setting



HTB1YawPJpXXXXXtXVXXq6xXFXXXz



3. Make Effects



HTB1H9hlJFXXXXbMXXXXq6xXFXXXC



4. Output controller data and put it into SD card



 1



For more details of software operation, please refer to the video post above.



Step4. Configure H803TC with 4 buttons



Power H803TC on



Long press "MENU" button to switch to English



001



Switch files



002



Set Playback Mode, press "OK" to save



003



Set speed, press "OK" to save



004



Set brightness



005



Set DMX Address for H803TC



This function is used when H803TC is connected to DMX console



 -3



For example:



If DMX Address is 1, you can use channel 1,2,3 on DMX Console to switch files, change speed and brightness.



If DMX Address is 3, you can use channel 3,4,5 on DMX Console to switch files, change speed and brightness.



In a word, the DMX Address is the starting channel on DMX Console.



Press "OK" to start addressing.



006



Work with PC(online)



Step1. Connect lights, slave controllers and H803TC like the following image.



HTB1gB0MPVXXXXXeaXXXq6xXFXXXs



Step2. Download and Install LED Studio Software



In this mode, you will need LED Studio Software.



LED Studio download link: https://drive.google.com/open?id=0B1gzqyV6hfOgWFpuM3BoN1VaTGs



Step3. NET2 Setting



In online mode, NET2 transmits data received from PC to NET1.



007



Step4. Allocate an IP address for H803TC



01
HTB1AVN5JFXXXXa1aXXXq6xXFXXXa
03
04
05

Step5. Program in LED Studio Software



Basic software workflow



1. Place Pixels



For example there are 4 slave controllers(H801RC) connected to H803TC, 8 ports of H801RC are all connected to leds.



In LED Studio



 3



2. Slave Setting



 3



Note: many chips share one option, for example:



 3



3. Multi-Net Setting




HTB1W9N9JXXXXXcDXXXXq6xXFXXXY



4. Make Effects



HTB1W9N9JXXXXXcDXXXXq6xXFXXXY



4. Control DMX512 chip lights



H803TC can control H801RC, H802RA and H801RA three kinds of slave controllers(they all support DMX512 protocol),



but by using H803TC + H802RA, you can set DMX address for DMX512 chips.



 -1



H802RA   
Take TM512 strip for example:
Step1. Set them up
timg
Step2. Set address with four buttons
11
5. Specifications



Input Voltage:   Customized



Power Consumption:   1W



Drive Pixels Number:   170000



Weight:   1.1KG


分享到:
Hits:  UpdateTime:2018-03-09 13:35:54  【Printing】  【Close
Previous:H801TC  Next:H802TB