华灿兴科技版权所有® 2010-2025 粤ICP备10101563号
(1). 4 ports drive maximum 6144 pixels.
(2). SD card supports FAT32 and FAT16 format.
(3). You can switch files, adjust brightness, set clock frequency by remote control or by four buttons.
(4). Set DMX address for TM512, UCS512 and other DMX512 chips.
LPD6803, LPD8806, LPD6813, LPD1882, LPD1889, LPD6812, LPD1883, LPD1886, DMX512, APA102, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2811, WS2812, TM1803, TM1804, TM1809, TM1812, TM1829, TA9912, TM1913, TM1914, TM1926, WS2801, WS2803, DZ2809, P9813, P9816, SM16716, LD151x, LD153x, MBI6021, MBI6023, MBI6024, INK1003, LX1003, LX2003, LX2006, TLS3001, TLS3002, etc.
Note: H802SE supports more than the chips listed above(for example UCS2903 has the same sequence diagram with UCS1903, H802SE supports them all).
4. Product Display
GND, DAT: for WS2811, WS2812, UCS1903, SK6812, etc.
GND, CLK: for APA102, etc.
When you choose DMX512 in software, DAT and CLK turn to D+ and D-
5. Basic Workflow
Assume you have 4 pcs individual 16*16 (pixels) WS2812 panel, and want to put them together to make a larger display.
Step 1: Use LED Build Software to program
(1). Place Pixels
(2). Light Setting
(3). Make Effects
Effect for each panel could be different
You can also import video
(4). Output controller data and put it into SD card
For more details, please refer to the video post above.
6. Set DMX address for DMX512 chips (TM512, UCS512, etc)
For other chips
Step 1. Power controller on with or without SD card.
Step 2. Press "MODE", then press "+" or "-" to choose chip.
TM512 and UCS512: C01
Step 3. Press "MODE" to set channel number occupied by each chip, press "+" or "-" to modify.
Step 4. Press "MODE", enter the starting chip number(which chip you want to start encoding with).
Step 5. Then press "SET". After a few seconds, UCS512 and TM512 lamp will turn white then green. Repower lamps, address will be updated.
H802SE can encode for 800 pixels each time.
Use remote control
Press "Encode" to enter step 2, use those digital buttons to set chip type.
Press "+" to enter step 3, set channel number with digital buttons.
Press "+" to enter step 4, set starting chip number with digital buttons.
Then press "confirm".
Remember to repower the lamps.
Input Voltage: DC 5~24V
Power Consumption: 0.8W
Control Pixels Number: 6144
Dimension: L132 x W71 x H24
Carton Size: L150 x W82 x H38